About this item

• The area where the pool is to be installed must be absolutely level and level. Do not install the pool on a slope or an inclined surface.
• Do not install the pool on mud, sand, soft or loose soil. Place a protective floor mat between the chosen area and the pool (not included, available separately).
• First, inflate the lower air chamber with a manual air pump designed specifically for inflatable products, and then the next chamber (s) in sequence.
• Do not inflate the product too much. Fill the product with air until the surface is firm to the touch but not hard. If there is tension at the seams, the product is too swollen. If a seam starts to tighten, stop inflation immediately and release air to reduce pressure until signs of strain on the seam disappear. Do not inflate too much or use a high pressure air compressor as this may cause seam leaks.
• Securely close and push in all inflation valve caps by pressing firmly on them. Place the product on a flat, clean surface that is free of sharp objects that may puncture the product.
• Remove all hard, sharp, and loose objects such as jewelry, watches, buckles, keys, shoes, hairpins, etc. from users before using or entering the pool.
• Dry thoroughly and store the product in a safe place when not in use. Bend the product loosely and avoid sharp bends, corners and creases that can damage the device.